Mazak VTC 800/20SR 5 Axis Vertical Machining Centre with Mazatrol Matrix 2 CNC Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=2000mm Y=800mm Z=720mm B=222 Degrees (+ 111 To -111) C=360 Degrees (0.001) Din40 Spindle Taper, 48 Station ATC, Table Dimensions 2.5m x 820mm, C Axis 500mm Diameter, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 247215 (2013)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mobile Trolley with Contents of CAT 40 Tooling

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Aluminium Plate suitable for Mazak VTC-800/20SR 2.1m x 840mm

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 1, 1A & 1B

Mazak VTC 800/20SR 5 Axis Machining Centre with Mazatrol Matrix 2 CNC Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=2000mm Y=800mm Z=720mm B=222 Degrees (+ 111 To -111) C=360 Degrees (0.001) Din40 Spindle Taper, 48 Station ATC, Table Dimensions 2500 x 800mm, C Axis 500mm Diameter, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 247215 (2013)

and

Mobile Trolley with Contents of Machine Tooling

and

Aluminium Plate suitable for Mazak VTC-800/20SR 2.1m x 840mm

Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mazak Variaxis 630-5X II 5 Axis Vertical Machining Center with Mazatrol Matrix CNC Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=630mm Y=765mm Z=510mm A=150 Degrees (+30 to -120) C=360 Degrees (0.001) Din40 Spindle Taper, 40 Station ATC, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface, (Note No Probe) Swarf Bin, S/No. 188504 (06/2006)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of CAT 40 Tooling, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 2 & 2A

Mazak Variaxis 630-5X II 5 Axis Vertical Machining Center with Mazatrol Matrix CNC Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=630mm Y=765mm Z=510mm A=150 Degrees (+30 to -120) C=360 Degrees (0.001) Din40 Spindle Taper, 40 Station ATC, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface, (Note No Probe) Swarf Bin, S/No. 188504 (06/2006)

and

Rack of CAT 40 Tooling, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mazak Nexus VMC 510C 3 Axis Vertical Machining Centre with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm 4th Axis 360 degrees, 4th Axis is a Kitagawa MR250RAE03 Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1300 x 550mm, Through Spindle Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 190152 (2006)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of CAT 40 Tooling, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 3 & 3A

Mazak Nexus VMC 510C 3 Axis Vertical Machining Center with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm 4th Axis 360 degrees, 4th Axis is a Kitagawa MR250RAE03 Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1300 x 550mm, Through Spindle Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 190152 (2006)

And

Rack of CAT 40 Tooling, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mazak Nexus VCN 410A-II 3 Axis Vertical Machining Centre with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=560mm Y=410mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 900 x 410mm, Through Spindle Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 190966 (2007)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of CAT 40 Tooling, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 4 & 4A

Mazak Nexus VCN 410A-II 3 Axis Vertical Machining Centre with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=560mm Y=410mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 900 x 410mm, Through Spindle Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 190966 (2007)

and

Rack of CAT 40 Tooling, Rack Included

Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mazak Nexus VMC 510C 3 Axis Vertical Machining Centre with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1300 x 550mm, 4th Axis Interface, Through Spindle Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 179004 (2006)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mobile Trolley with Qty of CAT 40 Tooling

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 5 & 5A

Mazak Nexus VMC 510C 3 Axis Vertical Machining Centre with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1300 x 550mm, 4th Axis Interface, Through Spindle Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 190152 (2006)

and

Mobile Trolley with Qty of CAT 40 Tooling

Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mazak Nexus QT250-II MSY 6 Axis Turning Centre with Mazatrol Matrix Nexus Control System, Maximum Spindle Speeds Main 4000rpm, Sub Spindle 6000rpm, Milling Speed 4500rpm, Axis Travels X= Y= Z= W= Main Spindle C=360 Degrees (0.001) Sub Spindle C=360 Degrees (0.001), 12 Station Turret, Tool Presetter, Parts Catcher, Multifeed MX1B Barfeed, Swarf Bin, S/No. 212118 (2008)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

(1) x Small Steel Table with Wooden Top and Tooling for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 6 & 6A

Mazak Nexus QT250-II MSY 6 Axis Turning Centre with Mazatrol Matrix Nexus Control System, Maximum Spindle Speeds Main 4000rpm, Sub Spindle 6000rpm, Milling Speed 4500rpm, Axis Travels X= Y= Z= W= Main Spindle C=360 Degrees (0.001) Sub Spindle C=360 Degrees (0.001), 12 Station Turret, Tool Presetter, Parts Catcher, Multifeed MX1B Barfeed, Swarf Bin, S/No. 212118 (2008)

and

(1) x Small Steel Table with Wooden Top and Tooling for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mazak Nexus QTN 200 MSY 6 Axis Turning Centre with Mazatrol Nexus 640T Control System, Maximum Spindle Speeds Main 5000rpm, Sub Spindle 6000rpm, Milling Speed 4500rpm, Axis Travels X=260mm Y=140mm Z=475mm W= Tbc Main Spindle C=360 Degrees (0.001) Sub Spindle C=360 Degrees (0.001), 12 Station Turret, Tool Presetter, Parts Catcher, Multifeed MX1B Barfeed, Swarf Bin, S/No. 184741 (2006)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser

(1) Small Steel Table with Wooden Top and Tooling for Mazak Nexus QTN 200 MSY

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser

Combination of Lots 7 & 7A

Mazak Nexus QTN 200 MSY 6 Axis Turning Centre with Mazatrol Nexus 640T Control System, Maximum Spindle Speeds Main 5000rpm, Sub Spindle 6000rpm, Milling Speed 4500rpm, Axis Travels X=260mm Y=140mm Z=475mm W= Tbc Main Spindle C=360 Degrees (0.001) Sub Spindle C=360 Degrees (0.001), 12 Station Turret, Tool Presetter, Parts Catcher, Multifeed MX1B Barfeed, Swarf Bin, S/No. 184741 (2006)

and

(1) x Small Steel Table with Wooden Top and Tooling for Mazak Nexus QTN 200 MSY

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Deckel Maho DMU 70 Evolution 5 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=750mm Y=600mm Z=520mm C=360 Degrees (0.001) B=180 Degrees, HSK A 63 Spindle Taper, 60 Station ATC, Blum Tool Presetter, Swarf Conveyor, Coolant Filtration Unit, Swarf Bin, S/No. 15035710924 (2006)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of HSK Tooling for DMU 70 Evolution, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser

Combination of Lots 8 & 8A

Deckel Maho DMU 70 Evolution 5 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=750mm Y=600mm Z=520mm C=360 Degrees (0.001) B=180 Degrees, HSK A 63 Spindle Taper, 60 Station ATC, Blum Tool Presetter, Swarf Conveyor, Coolant Filtration Unit, Swarf Bin, S/No. 15035710924 (2006)

and

Rack of HSK Tooling for DMU 70 Evolution, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Deckel Maho DMU 50 Evolution 5 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=500mm Y =450mm Z=400mm C=360 Degrees (0.001) B=160 Degrees, HSK A 63 Spindle Taper, Coolant Filtration Unit, Swarf Conveyor, Through Spindle Coolant, S/No. 10915558924 (2007)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of HSK Tooling for Deckel Maho DMU 50 Evolution, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 9 & 9A

Deckel Maho DMU 50 Evolution 5 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=500mm Y =450mm Z=400mm C=360 Degrees (0.001) B=160 Degrees, HSK A 63 Spindle Taper, Coolant Filtration Unit, Swarf Conveyor, Through Spindle Coolant, S/No. 10915558924 (2007)

and

Rack of HSK Tooling for Deckel Maho DMU 50 Evolution, Rack Included

Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser

Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 10000rpm, Axis Travels X=1035mm Y=560mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1200 x 560mm, Swarf Conveyor, Coolant Filtration Unit, Through Spindle Coolant, 160mm Diameter 4th Axis, S/No. 15425023754 (2007)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 10 & 10A

Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 10000rpm, Axis Travels X=1035mm Y=560mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1200 x 560mm, Swarf Conveyor, Coolant Filtration Unit, Through Spindle Coolant, 160mm Diameter 4th Axis, S/No. 15425023754 (2007)

and

Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V, Rack Included

Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre with Heidenhain I-TNC 530 Control System, 4th Axis, Tailstock, 6'' Chuck, Maximum Spindle Speed 10000rpm, Axis Travels X=1035mm Y=560mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1200 x 560mm, Swarf bin, Swarf Conveyor, Coolant Filtration Unit, Through Spindle Coolant. S/No. 15425023784 (2007)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 11 & 11A

Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 10000rpm, Axis Travels X=1035mm Y=560mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1200 x 560mm, Swarf Conveyor, Coolant Filtration Unit, Through Spindle Coolant. S/No. 15425023784 (2007)

and

Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V, Rack Included

Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Leadwell MH400 4 Axis Twin Pallet Horizontal Machining Centre with Fanuc 18-m Control System, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=575mm Y=525mm Z=525mm B=360 Degrees (0.001), 40 Station ATC, Twin Tables, Pallet Dimensions 400mm x 400mm. S/No L1SIH0839 (1999)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of BT 40 Tooling for Leadwell MH400, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 12 & 12A

Leadwell MH400 4 Axis Twin Pallet Horizontal Machining Centre with Fanuc 18m Control System, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=575mm Y=525mm Z=525mm B=360 Degrees (0.001), 40 Station ATC, Pallet Dimensions 400 x 400mm, S/No L1SIH0839 (1999)

and

Rack of BT 40 Tooling for Leadwell MH400, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Leadwell V40 3 Axis Vertical Machining Centre with Mitsubishi CNC Control System, Maximum Spindle Speed 8000rpm, Axis Travels X=1020mm Y=510mm Z=510mm, Spindle Taper BT40, 20 Station ATC, Table Dimensions 500 x 1200mm, S/No. L1S1H0168 (1997)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of BT 40 Tooling for Leadwell V40, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 14 & 14A

Leadwell V40 3 Axis Vertical Machining Centre with Mitsubishi CNC Control System, Maximum Spindle Speed 8000rpm, Axis Travels X=1020mm Y=510mm Z=510mm, Spindle Taper BT40, 20 Station ATC, Table Dimensions 500 x 1200mm, S/No. L1S1H0168 (1997)

and

Rack of BT 40 Tooling for Leadwell V40, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Box of CAT 40 Tooling for Cincinnatti Arrow 750

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Cincinnati Arrow 500 3 Axis Vertical Machining Centre with Cincinnatti Acramatic A2100 CNC Control System, Maximum Spindle Speed 6000rpm, BT40 Spindle Taper, Axis Travels X=500mm Y=500mm Z=500mm, 21 Station ATC, Table Dimensions 700mm x 500mm. S/No. 7042 A00 RD 0972 (1996)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of CAT 40 Tooling for Cincinnatti Arrow 500, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 16 & 16A

Cincinnati Arrow 500 3 Axis Vertical Machining Centre with Cincinnatti Acramatic A2100 CNC Control System, Maximum Spindle Speed 6000rpm, BT40 Spindle Taper, Axis Travels X=500mm Y=500mm Z=500mm, 21 Station ATCX, Table Dimensions 700 x 500mm. S/No. A00RD0972 (1996)

and

Rack of CAT 40 Tooling for Cincinnatti Arrow 500, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Hitachi Seiki VK55 3 Axis Vertical Machining Centre with Seicos CNC Control System, Maximum Spindle Speed 4500rpm, Axis Travels X=1000mm Y=550mm Z=550mm, Bt50 Spindle Taper, 30 Station ATC, Table Dimensions 1112mm x 560mm, S/No. VK55036 (1987)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Rack of BT 50 Tooling, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 17 & 17A

Hitachi Seiki Vk55 3 Axis Vertical Machining Centre with Seicos CNC Control System, Maximum Spindle Speed 4500rpm, Axis Travels X=1000mm Y=550mm Z=550mm, Bt50 Spindle Taper, 30 Station ATC, Table Dimensions 1120 x 560mm, S/No. VK55036 (1987)

and

Rack of BT 50 Tooling, Rack Included

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mazak Nexus QTN 200M CNC Turning Centre with Mazatrol 640T Nexus Control System, Axis Travels X=230mm Z=580mm C=360 Degrees (0.001), Maximum Spindle Speed 6000rpm, Maximum Milling Spindle Speed 5000rpm, 12 Station Turret, Tool Presetter. S/No. 175804 (2005) (Please Note: No Swarf Conveyor)

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Leadwell LT20SM 5 Axis CNC Lathe with Fanuc 18T CNC Control System, Maximum Main Spindle Speed 5000rpm, Maximum Sub Spindle Speed 5000rpm, 12 Station Turret, 6 Driven Stations on Turret, Axis Travels X=230mm Z=560mm Sub Spindle=515mm, Tool Presetter, S/No. C2S1H0693 (1998)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser

Chuck and Machine Part on Pallet for Leadwell LT20SM

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 19 & 19A

Leadwell LT20SM 5 Axis CNC Lathe with Fanuc 18T CNC Control System, Maximum Main Spindle Speed 5000rpm, Maximum Sub Spindle Speed 5000rpm, 12 Station Turret, 6 Driven Stations on Turret, Axis Travels X=230mm Z=560mm Sub Spindle=515mm, Tool Presetter, S/No. C2S1H0693 (1998)

and

Chuck and Machine Part on Pallet for Leadwell LT20SM

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Gildemeister DMG Sprint 32 Linear 8 Axis Sliding Head Lathe 8 Axis Sliding Head Lathe with Ge Fanuc 160i-B Control System, Maximum Spindle Speeds Main 8000rpm Sub 5000rpm Driven Tool Speed 5000rpm, Axis Travels X1= 50mm Y1=350mm Z1=120mm X2=265mm Y2=235mm Z2=320 C1=360 degrees C2=360 degrees, Maximum Turning Diameter 32mm, Parts Conveyor, Swarf Conveyor, Iemca Boss 54 Barfeed, Swarf Bin. S/No. 2301-0142 (2003)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Eguro Nuclet 10GL CNC 3 Axis Platten Lathe with Fanuc OT CNC Control System, Maximum Spindle Speed 5000rpm, Axis Travels X-260mm Z=250mm, 3-Jaw Chuck, Collet Chuck, Table Size 700 x 180mm, Parts Conveyor, S/No. 0003E (1996)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

IEMCA VIP 52/15 Barfeed (1997)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Grinding Attachment for Eguro Nuclet 10GL CNC 3 Axis Platten Lathe

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 21, 21A & 21B

Eguro Nuclet 10GL CNC 3 Axis Platten Lathe with Fanuc OT CNC Control System, Maximum Spindle Speed 5000rpm, Axis Travels X-260mm Z=250mm, Table Size 700 x 180mm, Parts Conveyor, S/No. 0003E (1996)

and

Iemca VIP 52/15 Barfeed (1997)

and

Grinding Attachment for Eguro Nuclet 10GL CNC 3 Axis Platten Lathe

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

XYZ Protam/Kingrich L425/KR-L480 CNC Lathe with Prototrak VL DRO, 1.1m Distance Between Centres, Quick Change Tooling. S/No. L173 (2002)

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling for XYZ Protam/Kingrich L425/KR-L480 CNC Lathe

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 22 & 22A

XYZ Protam/Kingrich L425/KR-L480 CNC Lathe with Prototrak VL DRO, 1.1m Distance Between Centres, Quick Change Tooling. S/No. L173 (2002)

and

Quick Change Tooling for XYZ PROTAM/KINGRICH L425/KR-L480 CNC Lathe

Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Swift 12.SV.5 Lathe with Acu-Rite DRO, 3ft 4-Jaw Chuck. S/No. 13094

Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.