Hurco VMX 30T Machining Centre with Dual Control with Graphics, Table Size 1020mm x 510mm, CAT40 Tooling, 24-Station Tool Changer, Swarf Conveyor, Spindle Chiller, 12,000rpm. S/No. H-H30838 (2012)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Qty of CAT40 Tooling

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Combination of Lot 100 & 100A

Hurco VMX 30T Machining Centre with Dual Control with Graphics, Table Size 1020mm x 510mm, CAT40 Tooling, 24-Station Tool Changer, Swarf Conveyor, Spindle Chiller, 12,000rpm. S/No. H-H30838 (2012)

and

Qty of CAT40 Tooling

Please Note: This Lot is located in Watlington.  Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Hurco VSX24 Machining Centre with Ultimax SSM Control, Table Size 760mm x 510mm, 10,000rpm, 24-Station Tool Changer, CAT40 Tooling. S/No. H20384 (2002)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Qty of CAT40 Tooling

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Combination of Lot 101 & 101A

Hurco VSX24 Machining Centre with Ultimax SSM Control, Table Size 760mm x 510mm, 10,000 RPM, 24-Station Tool Changer, CAT40 Tooling. S/No. H20384 (2002)

and

Qty of CAT40 Tooling

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Charmilles Robofil 290P Non-Submerged 5 Axis CNC Wire EDM with Charmilles Control, 700mm x 500mm Work Surface, Auto Wire Thread, Axis Travel X = 400mm, Y = 250mm, Z = 200mm, Maximum Work Piece dimensions X = 850mm, Y = 500mm, Z = 200mm, 30o Taper Cut, Non-Submerged Cutting, Auto Wire Thread, Wire Capacity 0.1 - 0.3mm Optional Guides, Hand Box Control, CRT Screen Monitor, 3-side Clamping Frame. S/No. 925677331428 (2000)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Charmilles Roboform 30 CNC EDM Machine with Charmilles CNC Control, On board Programming, Tool Changer, Full 'C' Axis, Table Size 500mm x 400mm, Tank Size 850mm x 550mm x 350mm Depth, Magnetic Chuck 380mm x 200mm, 4 Axis CNC EDM with C Axis and 4-Station Tool Changer, Axis Travel X = 350mm, Y = 250mm, Z = 300mm, C Axis 360o, Maximum Work Piece dimensions X = 940mm, Y = 590mm, Z = 300mm, C Axis 360o, Full 4 Axis Erosion with Vector, Free and Servo Planetry, 4 Station Tool Changer, 64A Generator, Handbox Control. S/No. 75015/625122 (1997)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Charmilles Roboform 31 used CNC EDM Machine with Charmilles CNC Control, On Board Programming, 4 Axis CNC EDM, C Axis and 4 Station Tool Changer, Axis Travel X = 350mm, Y = 250mm, Z = 300mm, C Axis 360o, Maximum Work Piece dimensions, X 780mm, Y 530mm, Z 300mm, C Axis, Full 4 Axis Erosion with Vector, Free and Servo Planetry, 4 Station Tool Changer, 64A Generator, Handbox control. S/No. 9-5106/635285 (1999)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Charmilles Form 2-LC Spark Eroder with Anilam Z-530 DRO, Table Size 500mm x 350mm, Tank Size 750mm x 480mm x 350mm Depth, Magnetic Chuck 260mm x 130mm and 3R System Tooling. S/No. 91011057.FC (1997)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Charmilles Form 2-LC Spark Eroder with Anilam Z-530 DRO, Table Size 500mm x 350mm, Tank Size 750mm x 480mm x 350mm Depth, Magnetic Chuck 260mm x 130mm, 3R System Tooling. S/No. 9591055 (1995)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Charmilles Form 2-LC Spark Eroder with Mitutoyo DRO, Table Size 500mm x 350mm depth, Tank Size 750mm x 480mm x 350mm Depth, Magnetic Chuck 260mm x 130mm, 3R System Tooling. S/No. 9361102 (1992)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Qty of 3R Tooling

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Charmilles Form 2-LC Spark Eroder. S/No. 9360102 (1992)

Please Note: This lot is in need of repair. This Item does not have a DRO or 3R Tool.

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

XYZ E Mill Turret Mill with Easson ES-8A DRO, Table Size 1270mm x 260mm with Collets. S/No. 1101024 (2012)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 540 X Surface Grinder with Coolant, Table Size 680mm x 150mm, 450mm x 150mm Magnetic Chuck. S/No. M20346 (1998)

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 540 Surface Grinder with Coolant, Table Size 660mm x 155mm, 255mm x 130mm Magnetic Chuck. S/No. 18653W35

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 540 Surface Grinder with Optidress and Mitutoyo DRO, Table Size 660mm x 150mm, 450mm x 150mm Magnetic Chuck, Dust. S/No. BO 13460

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 1311 Universal Cylindrical Grinder with Opti Dress and Mitutoyo DRO, 18’’ distance between Centres, 160mm 4-Jaw Chuck and 160mm Magnetic Chuck. S/No. BO 94489

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Bryant Symons AA300/1 Polisher. S/No. 5066-1100

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Bryant Symons AA300/1 Polisher. S/No. 5064-1098

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Alexander 2CG Tool & Cutter Grinder. S/No. 1863N

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

TOS FA3AV Vertical Milling Machine with Table 1025mm x 300mm. S/No. 10597

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Herbert Pillar Drill, Table Size 390mm x 330mm

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Forward Technology Hot Plate Welder

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Hydrovane Model 03307-200 Compressor. S/No. 881113HV8146 06/8/4

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Kemco Hurco TDM 2000 CMM Machine with Renishaw PK1 Probe, Working Area 500mm x 900mm x 350mm High. S/No. K6039

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Bench, 1.8m x 600mm x 840mm high

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

(3) Benches:- Bench 840mm x 600mm x 940mm high, Bench 1100mm x 900mm x 1030mm high and Bench 1850mm x 130mm x 940mm high.

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Bench 1900mm x 600mm x 900mm high

Please Note: Excludes Contents

Please Note: This Lot is located in Watlington. Unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.