SNK RB-2NM Bridge Type CNC Milling & Boring Machine with Fanuc Control Series 18m, Vertical and Horizontal Heads, BT50 Tooling, 40atc, Table size 2.5m x 1.2m, Travel lengths X = 4350mm Y = 2000mm Z = 600mm W = 900mm. S/No. 99K1738 (1999)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT50 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT50 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT50 Tooling

Please Note: This lot is located in Worcester, unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

BT50 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 100, 100A, 100B, 100C, 100D

Lot 100 - SNK RB-2NM Bridge Machine with Fanuc Control Series 18m, Vertical and Horizontal Heads, BT50 Tooling, 40atc, Table size 2.5m x 1.2m, Travel lengths X = 4350mm Y = 2000mm Z = 600mm W = 900mm. S/No. 99K1738 (1999)

and

Lot 100A - BT50 Tooling

and

Lot 100B - BT50 Tooling

and

Lot 100C - BT50 Tooling

and

Lot 100D - BT50 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Auerbach FBE 1500 Milling Machine with Heidenhain 407 Control, 4th Axis with 800mm Turntable, Table size 1.5m x 0.65m. S/No. 032 032 (1996)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

72” Webster & Bennett CNC VTL Vertical Borer, Retro fitted CNC Fagor Control, 72” 4 Jaw Chuck . S/No. 602342 (1980)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cincinnati Arrow Series 2 1000 Machining Centre with Heidenhain TNC 410ma Control, 21atc, Through Spindle Coolant. S/No. 7049-H00-KH1067

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cincinnati Milacron CNC 15 4th Axis Unit, 310mm Face Plate. S/No. 540

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cat40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cat40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 103, 103A, 103B, 103C

Lot 103 

Cincinnati Arrow Series 2 1000 Machining Centre with Heidenhain TNC 410ma Control, 21atc, Through Spindle Coolant. S/No. 7049-H00-KH1067

and

Lot 103A - Cincinnati Milicron CNC 15 4th Axis Unit, 310mm Face Plate. S/No. 540

and

Lot 103B - Cat 40 Tooling

and

Lot 103C - Cat 40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cincinnati Milacron Sabre 1000 Vertical Machining Centre with Heidenhain TNC 415BR Control, 21atc, Table size 1150mm x 510mm, Through Spindle Coolant. S/No. 7039 H01 RO 0467

Please Note: This lot is located in Worcester, unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Cat40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cat40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 104, 104A, 104B

Lot 104 - Cincinnati Milicron Sabre 1000 Vertical Machining Centre with Heidenhain TNC 415BR Control, 21atc, Table size 1150mm x 510mm, Through Spindle Coolant. S/No. 7039 H01 RO 0467

and

Lot 104A - Cat 40 Tooling

and

Lot 104B - Cat 40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cincinnati Milacron Arrow 500 Vertical Machining Centre with Heidenhain 410 Control, 21atc, Table size 700mm x 520mm. S/No. 7042-HOA-RA-1682

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cat40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cat40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 105, 105A, 105B

Lot 105 - Cincinnati Milicron Arrow 500 Vertical Machining Centre with Heidenhain 410 Control, 21 atc, Table size 700mm x 520mm. S/No. 7042-HOA-RA-1682

and

Lot 105A - Cat 40 Tooling

and

Lot 105B - Cat 40 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Doosan S550L Lathe with Fanuc Series 21i-TB Control, 3 Jaw Chuck 380mm, 12 Station Turret, Tailstock, Tooleye, Swarf Conveyor. S/No. LNR-1055 (2005)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Doosan S280 Lathe with Fanuc Series Oi-T Control, 3 Jaw Chuck 310mm, 10 Station Turret, Tailstock, Tooleye, Parts Catcher, Samsys Magazine Barfeed. S/No. LNG1141

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Colchester Tornado 200 Lathe S/No. C20374/336 (1996) with GE Fanuc Series O-T Control, 3 Jaw Chuck 210mm, 12 Station Turret, Tailstock, Swarf Conveyor, Hydrafeed HY Barfeed with a selection of Liners. S/No. 9280

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Okuma & Howa ACT 3 Lathe with Fanuc Series O-T Control, 3 Jaw Chuck 210mm, Tooleye, Tailstock, 12 Station Turret. S/No. 09655

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Okuma & Howa ACT 4 Lathe with Fanuc Series 15-T Control, 3 Jaw Chuck 300mm, 12 Station Turret, Tooleye, Tailstock. S/No. 01641

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Colchester Electronic Mastiff Lathe with GE Fanuc Series 20-T Control, 2200mm between Centres, Gap Bed 660mm Faceplate, 3 Jaw Chuck 380mm, 4 Jaw Chuck 400mm, 3 Pont Steady, Quick Change Tooling. S/No. EM0150 (1999)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Colchester Mastiff 1400 Lathe, 3 Jaw Chuck 310mm, 1600mm between Centres, Gap Bed, Quick Change Tooling, Newhall Dro, 3 Point Steady. S/No. 8/0203/06486DD

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport Series 1 Milling Machine, Heidenhain Dro, Table size 1220mm x 230mm with Horizontal Head. S/No. 053120493

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Moore Jig Grinder Model No. 2, Table size 19” x 10”, Anilam 411 Wizard Dro. S/No. 7125

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Moore Jig Grinder Model No. 2, Table size 19” x 10”, Anilam 411 Wizard Dro. S/No. 7032

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 540P Surface Grinder, Acu-rite 111 Dro with Optidress, Table size 26” x 6”. S/No. B0-97140

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 1400 Surface Grinder 18” x 6” Magnetic Chuck, Acu-rite Dro. S/No. B0-94219

Please Note: This lot is located in Worcester, unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Alexander Triple Twelve Horizontal Bandsaw. S/No. 42011-1/077

Please Note: This lot is located in Worcester, unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

Linde Lansing Fork Truck Model FOERIS 120 FFL, Side Shift, Capacity 1800kg, Lift 4600mm S/No. 90036532 (1990) (Needs repair to power steering)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.