Doosan Puma 500 CNC Lathe with Fanuc Series 21i – TB Control, 630mm 4 Jaw Chuck, 12 Station Turret, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooling, Qty of Jaws. S/No. PM450518 (05/2008)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

7 Drawer Cabinet with Qty of Carbide Tips, Boring Bars and Sleeves Suitable for Doosan Puma 

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 100 & 100A

100 - Doosan Puma 500 CNC Lathe with Fanuc Series 21i – TB Control, 630mm 4 Jaw Chuck, 12 Station Turret, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooling, Qty of Jaws. S/No. PM450518 (05/2008)

and

7 Drawer Cabinet with Qty of Carbide Tips, Boring Bars and Sleeves Suitable for Doosan Puma 

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Puma 500 CNC Lathe with Fanuc Series 18i – T Control, 450mm 3 Jaw Chuck, Hydraulic Steady, 12 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PM450329 (03/2001)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

2 Door Cabinet with Boring Bars, Carbide Tip Holders, Cutters, Centre Drills and Sleeves suitable for Puma 500 CNC Lathe

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 101 & 101A

101 - Puma 500 CNC Lathe with Fanuc Series 18i – T Control, 450mm 3 Jaw Chuck, Hydraulic Steady, 12 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PM450329 (03/2001)

and

101A - 2 Door Cabinet with Boring Bars, Carbide Tip Holders, Cutters, Centre Drills and Sleeves suitable for Puma 500 CNC Lathe

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Puma 450 CNC Lathe with Fanuc Series 18 – T Control, 450mm 3 Jaw Chuck, 12 Station Turret with Tooling, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooleye, Tooling. S/No. PM450282 (11/1999)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

8 Drawer Cabinet with Carbide Tips, Sleeves, Taps, Cutters and Jaws for Doosan Puma

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 102 & 102A

102 - Puma 450 CNC Lathe with Fanuc Series 18 – T Control, 450mm 3 Jaw Chuck, 12 Station Turret with Tooling, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooleye, Tooling. S/No. PM450282 (11/1999)

102A - 8 Drawer Cabinet with Carbide Tips, Sleeves for Doosan, Taps, Cutters, Jaws

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Daewoo Puma 12L-B CNC Lathe with Fanuc Series O-T Control, 300mm 3 Jaw Chuck, 10 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PL121180 (04/1997)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

7 Drawer Cabinet with Carbide Tips, Sleeves Suitable for Doosan Puma

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 103 & 103A

103 Daewoo Puma 12L-B CNC Lathe with Fanuc Series O-T Control, 300mm 3 Jaw Chuck, 10 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PL121180 (04/1997)

103A 7 Drawer Cabinet with Carbide Tips, Sleeves Suitable for Doosan

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Daewoo Ace Series HM800 CNC Horizontal Machining Centre with Fanuc Series 18i – M Control, Twin 800mm Pallet Size, Swarf Conveyor, 40 Station Tool Changer, B Axis, CAT 50 Tooling, Fixtures 360mm x 360mm. S/No. HM80047 (2002)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Mobile Tooling Trolley with Qty CAT 50 Tooling

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

7 Drawer Cabinet with Drills, Carbide Tips, Cutters, Taps and Collets

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Cabinet with 3 Drawers including Tips and 12 ACT 50 Tooling

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 104, 104A, 104B & 104C

104 - Daewoo Ace Series HM800 CNC Horizontal Machining Centre with Fanuc Series 18i – M Control, Twin 800mm Pallet Size, Swarf Conveyor, 40 Station Tool Changer, B Axis, CAT 50 Tooling, Fixtures 360mm x 360mm. S/No. HM80047 (2002)

104A - Mobile Tooling Trolley with Qty CAT 50 Tooling

104B - 7 Drawer Cabinet with Drills, Carbide Tips, Cutters, Taps and Collets

104C - Cabinet with 3 Drawers including Tips and 12 ACT 50 Tooling

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Doosan Mynx 650/50 CNC Vertical Machining Centre with Fanuc Series 21i-MB Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 650mm Table Size. S/No. AV630891 (09/2006)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Qty of CAT 50 Tooling

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 105 & 105A

105 - Doosan Mynx 650/50 CNC Vertical Machining Centre with Fanuc Series 21i-MB Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 650mm Table Size. S/No. AV630891 (09/2006)

and

105A - Qty of CAT 50 Tooling

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre with Fanuc Series 18-M Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 700mm Table Size. S/No. AV650231 (2000)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Cabinet with CAT 50 Tooling

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 106 & 106A

106 - Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre with Fanuc Series 18-M Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 700mm Table Size. S/No. AV650231 (2000)

and

106A - Cabinet with CAT 50 Tooling

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Leadwell MCV-760BP CNC Vertical Machining Centre with Fanuc Series O-M Control, 4th Axis Unit 270mm, Tailstock, 3 Jaw Chuck, 1000mm x 500mm Table Size. S/No. L1S1E 0830 (1995) 

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Leadwell V-20 CNC Vertical Machining Centre with Fanuc Series O-MD Control, 16 Station Tool Changer, 250mm 3 Jaw Chuck on Table, Table Size 600mm x 350mm, Qty of BT 40 Tooling. S/No. L2TJB0038 (06/2002)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Elbo PV2 Control Tool Setter. S/No. 71122

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 108 & 108A

108 - Leadwell V-20 CNC Vertical Machining Centre with Fanuc Series O-MD Control, 16 Station Tool Changer, 250mm 3 Jaw Chuck on Table, Table Size 600mm x 350mm, QTY of BT 40 Tooling. S/No. L2TJB0038 (06/2002)

and

108A - Elbo PV2 Control Tool Setter. S/No. 71122

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Tacchella Electra 1523-CNC Trade Grinder with GE Fanuc Series 180-T Control 400mm Wheel Size, Tooling, 100mm 3 Jaw Steady, 150mm 3 Jaw Steady, 200mm 3 Jaw Steady, Filtration Unit. S/No. 6765 (2002)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Grisetti Grinder, 160mm 3 Jaw Chuck, 200mm 3 Jaw Chuck Distance between Centres 1200mm, 320mm Wheel Size, Internal and External Grinding

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Tur 630m Lathe, 380mm 3 Jaw Chuck, Distance between Centres 2m, Quick Change Tooling, (2) 3 Point Steadies. S/No. 48982

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Mexim FU36 Bed Mill, Table Size 1600mm x 360mm, Horizontal and Vertical Heads. S/No. 6312 (1996)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Serrmac TCS40 Milling/Drilling Machine, Table size 800mm x 250mm. S/No. 962637 (1996)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Bragonzi Borer, Table Size 1106mm x 950mm, Face Plate 500mm, Distance from Face Plate to Head 2.4m

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Caser Radial Drill, 50mm – 1.6m Throat Size, Box Table 750mm x 750mm x 800mm. S/No. 73024

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Super Valmer Pedestal Drill Model 25

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Aceti Macchine Model 101 Tool Sharpener. S/No. 185 (1996)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Segment 8” Vertical Grinder, Table Size 12”. S/No. 9399 (1993)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

MS Spring Pillar Drill, Table Size 360mm x 300mm, Rise and Fall Table

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

MEP Shark 330 AX1-S Vertical Automatic Bandsaw. S/No. 059341/08A (1999)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

IMET Vertical Bandsaw with 45 Degree Angle. S/No. 022880001 (2002)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Saw Blades

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 121 & 121A

121- IMET Vertical Bandsaw with 45 Degree Angle. S/No. 022880001 (2002)

and 

121A - Qty of Saw Blades

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Friggi Vertical Bandsaw with 45 Degree Angle

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Opus 350 Vertical Wood Bandsaw, Table Size 760mm x 600mm, Throat Size 550mm, Hydraulic Table. S/No. 348 (1999)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Selco WU230 Mig Welder, Burning Torch with Trolley for Asesalene. S/No. 010040000036

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

OMCN 150 Ton Beam Hydraulic Press, Table Size 700mm x 570mm, Piston Size 135mm, Pressure 400 Bar. S/No. 07 (2000)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Marpol 120mm Horizontal Belt Linisher. S/No. 1237 (2007)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Femi 150mm Double Ended Grinder. S/No. 8148431 and Femi 150mm Double Ended Grinder with Bench. S/No. 8116431

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Box of Carbide Tips

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Qty of U Drills

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Long Series Drills

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Qty of 3-Jaw Chucks (2) x 200mm, (1) x 160mm, (2) x 250mm

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Box of Carbide Tip Holders

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

(1) 150mm Machine Vice & (1) 150mm Swivel Machine Vice

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

380mm 3 Jaw Chuck, Cylinder with Draw Bar inside Diameter Draw Bar 115mm

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Metric Micrometres

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Granite Surface Table 600mm x 400mm

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Comparator Gauges

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Callipers

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Spray Booth 1500mm x 1200mm x Opening Size 1.3m and Qty of Spray Guns and Sander

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.