Combination of Lots 1A to 1S

1A - (4) x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)
1B - Spare & Unused Cloreren V-Block
1C - Vollmar 5 Component Gravimetric Blender
1D - Vollmar 5 Component Gravimetric Blender
1E - Vollmar 5 Component Gravimetric Blender
1G - Dust Collection, Re-Trim Waste System
1H - Chilled Water Tank/Pumping Station
1I - Extrol Cast Line Control System, Switchgear
1J - Battenfeld Gloucester 90mm dia Extruder, 30:1 LD Twin Helix, with Screen Changer (2000)
1K - Battenfeld Gloucester 150mm dia Extruder, 30:1 LD Twin Helix, 6-Zone, with Screen Changer (2000)
1L - Battenfeld Gloucester 70mm dia Extruder, 30:1 LD Twin Helix with Screen Changer (2000)
1M - Cloreren Epoch II Die & Feedblock, Supporting Gantry
1N - Battenfeld Gloucester Twin-Roll Cast/Cooling x 700mm dia Section (2000), Eurotherm Scanner  (Please Note: For convenience of sale, the Krypton 85 sources are not included)
10 - Herbold SML 30/50-LV3-3 Granulator with Accoustic Enclosure
1P - Softal CSBD007-350-2IB8-2PR-2WA Double Sided Corona Discharge Treater, Corona Width 2400mm
1Q - Gloucester Phantom Indexing Turret Winder, Chilled Infeed Rolls, Overhead Gantry Support
1R - Hydraulic Core Puller with 3 x 6", 3 x 3" dia Rewind Shafts
1S - Floor Mounted Gantry System

1T - Underslung Abus 3.2T Single Beam Crane with Pendant Electric Hoist, 2 x Electric Chain Hoists

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(4) x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Spare & Unused Cloreren V-Block

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Vollmar 5 Component Gravimetric Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Vollmar 5 Component Gravimetric Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Vollmar 5 Component Gravimetric Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Dust Collection, Re-Trim Waste System

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Chilled Water Tank/Pumping Station

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cast Line Switchgear

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloucester 90mm dia Extruder, 30:1 LD Twin Helix with Screen Changer (2000)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloucester 150mm dia Extruder, 30:1 LD Twin Helix, 6-Zone with Screen Changer (2000)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloucester 70mm dia Extruder, 30:1 LD Twin Helix with Screen Changer (2000)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cloreren Epoch II Die & Feedblock, Supporting Gantry

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloucester Twin-Roll Cast/Cooling x 700mm dia Section (2000), Eurotherm Scanner (Please Note: For convenience of sale, the Krypton 85 sources are not included)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Herbold SML 30/50-LV3-3 Granulator with Accoustic Enclosure

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Softal CSBD007-350-2IB8-2PR-2WA Double Sided Corona Discharge Treater, Corona Width 2400mm

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Gloucester Phantom Indexing Turret Winder, Chilled Infeed Rolls, Overhead Gantry Support

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydraulic Core Puller with 3 x 6", 3 x 3" dia Rewind Shafts

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Floor Mounted Gantry System

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Underslung Abus 3.2T Single Beam Crane with Pendant Electric Hoist, 2 x Electric Chain Hoists

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 2A to 2U

2A - (4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)
2B - Hydreclaim 6 Component Continuous Blender
2C - Maguire 4 Component Gravimetric Batch Blender
2D - Maguire 4 Component Gravimetric Batch Blender
2E - Dust Collection, Re-Trim Waste System
2F - Chilled Water Tank/Pumping Station
2G - Excelsior Cast Line Control System, Switchgear
2H - 4 x Day Bins
2I - 2 x Dust Collection Frames
2J - Battenfeld Gloenco 90 mmm dia Extruder, 30:1 LD Twin Helix, with Nordson EH-35 Slide Plate Screen Changer (Fitted 2018)
2K - Battenfeld Gloenco 150mm dia Extruder, 30:1 LD Twin Helix, 6-Zone with Nordson EH-60 Slide Plate Screen Changer (Fitted 2018)
2L - Battenfeld Gloenco 90 mmm dia Extruder, 30:1 LD Twin Helix, with Nordson EH-35 Slide Plate Screen Changer (Fitted 2018)
2M - Cloreren Epoch Design Die & Feedblock with Temperature Controlled Deckles & Supporting Gantry
2N - Battenfeld Gloenco Twin-Roll Cast/Cooling x 500mm dia Section
2O - Thermofisher L400 Scanning Frame (Installed 2017) (Please Note: For convenience of sale, the Krypton 85 sources are not included)
2P - Sherman Double Sided Corona Discharge Treater with Tool-Temp TT-4500 Temperature Control Unit
2Q - Herbold SML 30 50 L3-3 Granulator, Serial No. 65970 (1995) with Accoustic Enclosure
2R - Wintech Indexing Turret Winder with Chilled Infeed Tension Rolls, Overhead Supporting Gantry
2S - Hydraulic Core Puller with 3 x 6", 3 x 3" dia Rewind Shafts
2T - Wall Mounted Rewind Shaft Storage Rack
2U - Floor Mounted Gantry System with Demag Pendant Electric Chain Hoist (4 x Uprights Required for Free Standing)

2V - Single Beam Crane with Demag Electric Chain Hoist

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydreclaim 6 Component Continuous Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Maguire 4 Component Gravimetric Batch Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Maguire 4 Component Gravimetric Batch Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Dust Collection, Re-Trim Waste System

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Chilled Water Tank/Pumping Station

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Excelsior Cast Line Control System, Switchgear

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

4 x Day Bins

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

2 x Dust Collection Frames

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloenco 90 mmm dia Extruder, 30:1 LD Twin Helix, with Nordson EH-35 Slide Plate Screen Changer (Fitted 2018)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloenco 150mm dia Extruder, 30:1 LD Twin Helix, 6-Zone with Nordson EH-60 Slide Plate Screen Changer (Fitted 2018)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloenco 90 mmm dia Extruder, 30:1 LD Twin Helix, with Nordson EH-35 Slide Plate Screen Changer (Fitted 2018)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cloreren Epoch Design Die & Feedblock with Temperature Controlled Deckles & Supporting Gantry

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloenco Twin-Roll Cast/Cooling x 500mm dia Section

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Thermofisher L400 Scanning Frame (Installed 2017) (Please Note: For convenience of sale, the Krypton 85 sources are not included)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sherman Double Sided Corona Discharge Treater with Tool-Temp TT-4500 Temperature Control Unit

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Herbold SML 30 50 L3-3 Granulator, Serial No. 65970 (1995) with Accoustic Enclosure

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wintech Indexing Turret Winder with Chilled Infeed Tension Rolls, Overhead Supporting Gantry

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydraulic Core Puller

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wall Mounted Rewind Shaft Storage Rack

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Floor Mounted Gantry System

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Single Beam Crane with Demag Electric Chain Hoist

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Ro-An Freedom Series R35-24 Pouch Machine. S/No. RSU-24-100 (2007) Parker CTC Plc Control, Speed (2) x 160 bags/min, Max Reel Dia Unwind 1000mm, Max Web Width 1520mm, Bag Width Min 80mm/Max 320mm, Bag Length Min 200mm/Max 550mm, Inner Core Unwind Dia 76 & 152mm, Perforation, Slitting, Zipper, Machine Length 16.5m, Configuration: Flat Pouch (No Gusset) Folded/Sealed Bottom/Zip, Side Gusseted Pouch, Pouch with Fin Seal, Euro Slot, Handle Punch, Tear Notch

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Dalmec 400kg SWL Articulated/Travelling Reel Hoist with Suspended Gantry

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bectel Articulated Floor Mounted Jib with 250kg SWL Electric Chain Hoist, Pneumatic Reel Lift

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Herbold SML 30 50 L3-2 Granulator. S/No. C5970 (1993) with Blades

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Thorworld Industries SMY249040FW6 10,000kgs SWL Mobile Yard Ramp. S/No. T62614YR (2016) with Manual Jack

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

40'0" Seafreight Shipping Container, Lighting

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

45'0" Seafreight Shipping Container

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

45'0" Seafreight Shipping Container

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Baler Services Hydraulic Yard Baler

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(36) Bays Link 51H Adjustable Pallet Racking, (9) Bays of Link 51E Adjustable Pallet Racking (Contents of racking not included)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hyster H2.50XMX 2390kg x 3300mm LPG Counterbalance Fork Lift Truck. S/No. H177B56769C (2005) with Twin Stage Mast, Sideshift, Solid Tyres, Fold Down Cabin, Snow Plough Attachment, Fork Extensions

(Please Note: This lot is subject to a late release date)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cascade 35E.QPB.Q00 Hydraulic Push/Pull Fort Lift Attachment. S/No. 176774.01, 1600kg Capacity

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Manual 250kg Capacity High Reach Truck

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(10) x Product Tables

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Stainless Steel Work Area with Lighting & Sink (Other lots shown are not inlcuded)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(2) Film Testing Units

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Metabo DS200 Double Ended Grinder and Bench (Contents not included)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.