Buffoli Type 2D-TRB-10-CNC Trans-Bar Flex Transfer Machine. This machine is able to produce fittings from round brass bars. It consists of a horizontal axis indexing turret with 12 stations, each one equipped with one rotating clamping device (chuck). There is 10 working units in the machine frame, for drilling, threading, rolling, recessing and turning. S/N 476 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Buffoli Type 3D-TR6-12 CNC Multi-Way Transfer Machine. This machine is able to produce fittings from brass forged parts. It consists of a horizontal axis indexing table with 10 stations, each one equipped with one rotating clamping device (chuck). there is 12 working spindles in the machine frame, for drilling, threading and recessing. S/N 475 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Buffoli Type 4D-TG9-14+1 MPM CNC Multi-Way Transfer Machine. This machine is able to produce fittings from forged brass parts. It consists of a vertical axis indexing turret with 9 stations, each one equiped with one rotating clamping device (chuck). There is 14 working units in the machine frame, for drilling, threading, rolling, recessing and turning. S/N 477 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Buffoli Type 3D-TR8-11 Multi-Way Transfer Machine, S/N 474 (2005)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydromec Model HF-3150-CD Hot Brass Forging Press, S/N 691 (2001) Nominal Capacity 3150kN, Slide Stroke 320mm, 22-40 Stroke Per Minute, Slide Adjustment 100mm, Bolster Dimensions 880 x 900mm, Cushion Capacity 500kN, Cushion Stroke 40-100mm, with Provit 5600 CNC Control, Maestri Type CT4-P 3500 4 Track LPG Furnace, S/N 1097.23 (2001) with Bucket Loading Elevator and 15 Stillages

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there areno loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

20 Stillages Suitable for Hydromec (Lot No 5).

810mm x 660mm x 620mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 5 & 5A

Lot 5 - Hydromec Model HF-3150-CD Hot Brass Forging Press, S/N 691 (2001) Nominal Capacity 3150kN, Slide Stroke 320mm, 22-40 Stroke Per Minute, Slide Adjustment 100mm, Bolster Dimensions 880 x 900mm, Cushion Capacity 500kN, Cushion Stroke 40-100mm, with Provit 5600 CNC Control, Maestri Type CT4-P 3500 4 Track LPG Furnace, S/N 1097.23 (2001) with Bucket Loading Elevator and 15 Stillages

Lot 5A - 20 Stillages Suitable for Hydromec (Lot No 5) - 810mm x 660mm x 620mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there areno loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydromec Turbo 200 Clipping Press, Nominal Capacity 200 kN, Max Daylight 300mm, Slide Stroke 150mm, 1800-2200 Stroke Per Hour, 5 Mounted Dies, Dies Diameter 200mm with Accoustic Booth, Hopper/Vibratory Bowl Feed, Staubli Pick & Place Unit, Computer Controlled Inspection Camera, S/N 909 (2005)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

17 Metal Stillages Approx. 770mm x 120mm x 800mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

17 Metal Stillages Approx. 770mm x 120mm x 800mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 6, 6A and 6B

Lot 6 - Hydromec Turbo 200 Clipping Press, Nominal Capacity 200 kN, Max Daylight 300mm, Slide Stroke 150mm, 1800-2200 Stroke Per Hour, 5 Mounted Dies, Dies Diameter 200mm with Accoustic Booth, Hopper/Vibratory Bowl Feed, Staubli Pick & Place Unit,, Computer Controlled Inspection Camera, S/N 909 (2005)

Lot 6A - 17 Metal Stillages - Approx. 770mm x 120mm x 800mm

Lot 6B - 17 Metal Stillages - Approx. 770mm x 120mm x 800mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there areno loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydromec Turbo 200/V Manual Clipping Press, Nominal Capacity 200 kN, Max Daylight 300mm, Slide Stroke 150mm, 1800-2200 Strokes Per Hour, S/N 304 (1995)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 1 3/4" (644) 6-Spindle Servo Lathe, S/N 59-2-A with Siemens Simatic PLC Control, Pietro Cucchi Standard 4m Bar Feed, Variable Feed and Speed.   S/N 219C05 (2005)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 13/4” Collets- C & M Flatform Toolholders- C & M Drillholders- Form Tools- Drills

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman & Cucchi 1” & 13/4” Spare Parts: Toggles-Toggle Operating Sleeve, Cucchi Segments, Collet Tubes, Collet Operating Shoes, Tapping Clutch, Springs, Pins & Bushes

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Milling Cutters for Thread Milling Attachments for Wickman 1” & 13/4” Multispindle Lathes.

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 1 3/4"- 6. C&M Rapide (Rebuilt 2005) ( 59-7-11), Original number 14618, Cucchi 4.0m with OP27 Control , Milling Drive in 5 (Head on Shelf), Push Over Recessor , Tapping in 4 (electric), Milling Drive in 4 (Head on Shelf), Quick Change Tooling, Detector, Electric Coolant Pump, Screw Type Swarf Conveyor and Swarf Bins , AC Spindle and Feed Motors, Variable Feed and Speed. 

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 13/4” Machine Accessories: Collets- C & M Flatform Toolholders- C & M Drillholders – Form Tools - Drills

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 1 3/4" - 6. Rebuilt by C&M to Rapide Specification in 2005 ( 59-4-D), Cucchi Loader 220C05 ( 2005) 4m with OP27, Length Detector, Air Push Reamer, Slide in 6, Milling Drive in Position 2 (head on shelves), External Broaching in Position 3, Pre Set Tooling, Screw Type Swarf Conveyor and Swarf Bins, Electric Coolant, Variable Feed and Speed. S/N 15719

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 13/4” Attachments and Machine Accessories: Thread Milling Attachment – Ramp Recessing Attachment – Collets – Churchill Part Off Toolholder – C & M Drillholders – C & M Flatform Toolholders.

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 10 & 10A

Lot 10 - Wickman 1 3/4" - 6. Rebuilt by C&M to Rapide Specification in 2005 ( 59-4-D), Cucchi Loader 220C05 ( 2005) 4m with OP27, Length Detector, Air Push Reamer, Slide in 6, Milling Drive in Position 2 (head on shelves), External Broaching in Position 3, Pre Set Tooling, Screw Type Swarf Conveyor and Swarf Bins, Electric Coolant, S/N 15719

Lot 10A - Wickman 13/4” Attachments and Machine Accessories: Thread Milling Attachment – Ramp Recessing Attachment – Collets – Churchill Part Off Toolholder – C & M Drillholders – C & M Flatform Toolholders.

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 1"- 6. Rebuilt in 2005 by C& M ,Rapide, Camless Pneumatic Pick Up in Position 6, Flat Generator Position 4, Thread Milling Position 3, Cucchl Loader (2005), AC Spindle and Feed Motors , Screw Type Swarf Conveyor , Electric Coolant Pump, Variable Feed and Speed. S/N 59-8-B

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 13/4” Drifting Attachment-Collets – C & M Flatform Toolholders – Form Tools & Drills.

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

C & M Rapid Tooling System with Acu-Rite DRO (Digital Read Out) (2005) (Used on Wickman Multi-spindle Lathes).

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 1"-6 C&M Rapide (Rebuilt New in 2005), AC Spindle and Feed Motors, Reaming Slide in Centre Block Position 6, Flat Generating ( polygon) in Cross Slide 4, Thread Milling in CrossSslide 5, Pre Set Tooling , Electric Coolant, Screw type Swarf Conveyor and Swarf Bins, Cucchi Loader 216C05 - OP27 Control, Variable Feed and Speed S/N 59-1-C

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman 1” Machine Collets – C & M Flatform Toolholders – C & M Drillholders – Churchill Part Off Toolholder – Form Tools

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Arboga-Darenth Swarf System with PLC (2006).

Consists of the following: 

Model TRS2 Roller Chain Drag Conveyor – Model SB Bar End Separator – Model TL2M Hinged Steel Conveyor – Model HD50 Horizontal Swarf Centrifuge

Darenth Arboga Type SB Centrifugal Swarf/Oil Separation System, S/N 1014-147 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Camas Multi-Station TRV Assembly Machine, S/N GR 7484 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Camas Multi-Station Assembly Machine, S/N GR 741 (2005)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tampoprint Valve Body 2-Colour Printing Machine, S/N RTI439

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tampo Valve Body Printing Machine, Type RTI Kompakt. S/No 1.11.05.0993

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Peening Line, Model MIX KEM 150. S/No 16316 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Rollwasch Machine, Model MIX KEM 150. S/No 16316 (2006)

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

5000kg Bar Storage Racks

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

500kg Bar Storage Racks

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

500kg Bar Storage Racks

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 19, 19A & 19B

Lot 19 - 5000kg Bar Storage Racks

Lot 19A - 500kg Bar Storage Racks

Lot 19B - 500kg Bar Storage Racks

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mikron HSM800 Vertical Machining Centre, with Heidenhain iTNC-530 Control, Steptec 36,000rpm Spindle, Swarf Conveyor, S/N 107.86.00.014 (2002)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Modul PL 4th Axis Unit with Tailstock

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 20 & 20A

Lot 20 - Mikron HSM800 Vertical Machining Centre, with Heidenhain iTNC-530 Control, Steptec 36,000rpm Spindle, Swarf Conveyor, S/N 107.86.00.014 (2002)

Lot 20A - Modul PL 4th Axis Unit with Tailstock

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Fanuc Robocut A-0C Type A04B-0309-B001/E5 Wire Cut EDM, with Fanuc Series 16-W CNC Control, Pendant Controller, 4th Axis, S/N P97Z0C944 (12/1997)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Harrison Alpha 400U Teach Lathe with GE Fanuc Control, Duplomatic 8 Station Turret, Tailstock, Spindle 2500rpm. S/N H70068 (2002)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mobile Tipping Skip, 520mm x 1000mm x 900mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Harrison M350 Centre Lathe with Quick Change Tool Post, Tailstock, DRO, S/N 351085

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jones & Shipman 540AP Surface Grinder

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jones & Shipman 540 Surface Grinder

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bridgeport Series 1 Turret Mill, with Power Feeds, DRO, Coolant Tray

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Trapanni Rosa Pedestal Drill

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cuoghi APE 25 Drill Point Grinder

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Clarkson MK2 Tool & Cutter Grinder

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wickman OPG Optical Profile Projector with Acu-Rite DRO, Circular Form Attachment

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Rigva Milling Machine

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Startrite Vertical Bandsaw

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Businaro Control Blade Sharpener, S/N 1846 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Zoller VSM400 Tool Setter, S/N 00879 (2005)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Starret 400 Series Profile Projector with Quada-Chek 200

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Metba Max - Pul5 - 1 Spark Eroder with System 3R Tooling Anilam Mini Wizard Dro, Table Size 4760mm x 350mm. S/No 125

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Viscontea 260 Powered Hacksaw

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cvebora Tigsart 251 Tig Welder. S/No A01710

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Coral Extractor, Model: Clean Go. S/No 262

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.