100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling, Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector, Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Operator Control Panel, Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table, Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4”Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Open Control Panel

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4” Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

60 Ton Platt/Mair Bar Draw Bench, Single Chain, Single, Double & Triple Draw; Built-In Mair Push Pointer, Max. Length of Draw 9m; Main DC Motor 315 Kw, 500 Volt, 1460/1611RPM, Max Draw Diameter 4” Round, Spare Die Blocks, Spare Carriage-single and triple draw; Feed Table, Exit Transfer Conveyor, In-Line 4-Saw Mair Indexing Cut-to-Length System and accumulation table (1989), Tilghman Wheelabrator Through-Feed Shot Blast Chamber (1995), (4) Wheel 11kW Motors, Shot Blast Cabinet with Entry and Exit Skewed 48” Roller Conveyor for 2 bar handling, Dust Collector, Operator Control Panel, Infeed/Outfeed Transfer Tables, Bronx Model PBRV 6, 2 Roll/Twin Motor Bar Straightener (2 x Sets Spare Rolls), Capacity 4” Dia Round MS, 3” Dia Hexagonal SS, Rolls 18” Dia x 26” Length; (2) 59.7Kw Motors; Spare Roll; Entry& Exit Protective Heavy Duty Tables, Transfer Conveyors, Spare Carriages & Tooling

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tilghman Wheelabrator Through-Feed Shot Blast Chamber (1995), (4) Wheel 11kW Motors, Shot Blast Cabinet with Entry and Exit Skewed 48” Roller Conveyor for 2 bar handling, Dust Collector, Operator Control Panel, Infeed/Outfeed Transfer Tables

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

60 Ton Platt/Mair Bar Draw Bench, Single Chain, Single, Double & Triple Draw; Built-In Mair Push Pointer, Max. Length of Draw 9m; Main DC Motor 315 Kw, 500 Volt, 1460/1611RPM, Max Draw Diameter 4” Round, Spare Die Blocks, Spare Carriage-single and triple draw; Feed Table, Exit Transfer Conveyor, In-Line 4-Saw Mair Indexing Cut-to-Length System and accumulation table (1989)

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

4 x Mair Splitting Saws (1989), Operator Control Panel, Infeed/Outfeed Transfer Tables

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bronx Model PBRV 6, 2 Roll/Twin Motor Bar Straightener (2 x Sets Spare Rolls), Capacity 4” Dia Round MS, 3” Dia Hexagonal SS, Rolls 18” Dia x 26” Length; (2) 59.7Kw Motors; Spare Roll; Entry & Exit Protective Heavy Duty Tables, Transfer Conveyors, Spare Carriages & Tooling

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIIB Bar Combined Drawing Line, 19mm – 42mm (38mm Hex) x 25-Ton Pull x 315KW Capacity, including Schumag Double Rotary Uncoilers, Coil Opener, OCN Horizontal & Vertical Pre-Straightener, George Fischer 3-Wheel (25KW) Shot Blast Chamber, Schumag Push Pointer, Schumag Model IIIB, Twin Carriage Drawing Machine and Straightener, Hydraulic Impact Cutoff, Bar Loader and Transfer Station, OCN SR63 2-Roll/Twin Motor (59KW) In-line Bar Straightener / Transfer Table, OCN Twin Chamfering Machine with Bar Bundler and Rejection Station, Bar Transfer, (2020) Defectomat Surface Crack Detector and (2) Demagnetisers, Bundler Accumulator, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Double Rotary Uncoilers, Coil Opener, Horizontal Pre-Straightener & Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

George Fischer Shot Blast Chamber

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIIB Bar Combined Drawing Line, 19mm – 42mm (38mm Hex) x 25-Ton Pull x 700KW Capacity, 44m Run including Schumag Push Pointer, Schumag Model IIIB, Twin Carriage Drawing Machine, and After Drawer Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydraulic Impact Cutoff

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bar Loader and Transfer Station

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

OCN SR63 2-Roll/Twin Motor (59KW) In-line Bar Straightener / Transfer Table, OCN Twin Chamfering Machine with Bar Bundler and Rejection Station, Bar Transfer, (2020) Defectomat Surface Crack Detector and (2) Demagnetisers, Bundler Accumulator, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag/Casa Grande IIBF, Flat Bar Drawing Line, 12mm – 30mm x 12-Ton Pull Capacity, including Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator. Milling Type Pointer, Horizontal/Vertical Pre Straightening, Vogel & Schumann 4-Wheel (35KW) Shot Blast, Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator, Milling Type Pointer, Horizontal/Vertical Pre Straightening

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Vogel & Schumann 4-Wheel (35KW) Shot Blast

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Crack Detector, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIB Bar Drawing Line, 15mm – 26mm x 15-Ton Pull x 200KW (Approx) Capacity, including Schumag Double Rotary
Decoilers, Rotary Coil Opener, Horizontal Pre-Straightener, Vertical Pre-Straightener, George Fischer Shot Blast Chamber, Schumag Push Pointer, Schumag Model IIB Twin Carriage Bar Drawing Machine, Straightener, Schumag Cutoff Shear, Schumag In-Line Polisher, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Double Rotary Decoilers, Rotary, Coil Opener, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

George Fischer Shot Blast Chamber (1998)

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIB Bar Drawing Line, 15mm – 26mm x 15-Ton Pull x 600KW Schumag Push Pointer, Schumag Model IIB, Twin Carriage Bar Drawing Machine and After Drawer Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Cutoff Shear

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag In-Line Polisher

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIB Bar Drawing Line, 15mm – 26mm x 15-Ton Pull x 200KW Capacity, including Schumag Double Rotary Decoilers, Coil Opener, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener, George Fischer 3-Wheel (25KW) Shot Blast Chamber, Schumag Push Pointer, Schumag Model IIB Twin Carriage Bar Drawing Machine, Straightener, Schumag Cut-To-Length Shear, Bar Loader and Transfer Station, Schumag in-Line Polisher, Runout to Bundler Accumulator, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Double Rotary Decoilers, Coil Opener, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

George Fischer 3-Wheel (25KW) Shot Blast Chamber

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Push Pointer, Schumag Model IIB Twin Carriage Bar Drawing Machine, Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 basis

Schumag Cut-To-Length Shear, Bar Loader and Transfer Station, Schumag in-line polisher Polisher, Runout to Bundler Accumulator

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IB Bar Drawing Line, 4mm – 16mm x 6.5-Ton Pull x 200KW Capacity, including Schumag Double Rotary Decoilers,
Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener, George Fischer Shot Blast Chamber, Schumag Twin Carriage Bar
Drawing Machine Drive Motor- 203Kw, 400volt DC, 1570-2800 RPM; Straightener, Crack Detector, Demagnetizer, Schumag Cut-To-Length Shear, Schumag Polisher, Schumag In-Line Double End Chamfering Machine (1987), Capacity 10 – 30mm Diameter with Bar Transfer and Bundler Accumulator, Associated Controls AMD Upgrade 2015, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Double Rotary Decoilers, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

George Fischer Shot Blast Chamber

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IB Bar Drawing Line, 4mm – 16mm x 6.5-Ton Pull x 350KW (check motor size) Capacity, Schumag Twin Carriage Bar Drawing Machine Drive Motor- 203Kw, 400volt DC, 1570-2800 RPM; and After Drawer Straightener, Crack Detector, Demagnetizer, Schumag Cut-To-Length Shear

Please Note: This lot is located in Willenhall, UK.There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Polisher

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Double End Chamfering Machine, Capacity 10 – 30mm Diameter; with Bar Transfer and Bundler Accumulator

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IS Bar Drawing Line, 7mm – 16mm x 6.5-Ton Pull x 203KW Capacity, including Schumag Double Rotary Decoilers, , Horizontal & Vertical Pre-Straightener, George Fischer Shot Blast Chamber, Schumag Triple Carriage Drawing Machine and Straightener, Crack Detector, Demagnetizer, Schumag Cut-To-Length Shear Schumag Polisher, Runout to Bundler Accumulator, Associated Controls, Drives and Equipment (Gearbox in need of repair)

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Double Rotary Decoilers, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

George Fischer Shot Blast Chamber

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Triple Carriage Drawing Machine and Straightener, Crack Detector, Demagnetizer, Schumag Cut-To-Length Shear Schumag Polisher, Runout to Bundler Accumulator, Associated Controls, Drives and Equipment (Gearbox in need of repair)

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Double End Chamfering Machine (Off Line) Complete with Entry Descrambling Table, Bar Transfer Conveyor, Exit Trough, Operator’s Pulpit Control Panel, Hydraulic Motor/Pump Unit, Chamfering Head Motors, 18.7/25 Kw, (ea).

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

40 Ton Bar Draw Bench, Single Chain, Single Draw, Built-In Push Pointer; Main Motor Missing; Exit Motorized Conveyor

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sir James Farmer Norton & Co 2-Roll Horizontal Bar Straightener, Roll Dimensions 9” Dia x 9” Length, Entry and Exit Feed Tables, Bottom Guide. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

George Fischer FL-4-30/110 Through-Feed Bar Shot Blast Line including, Bar Loading Table 60” Inch X 24’, Bar Motion Through-Feed Drive Rolls, 4 Wheel Blast Media. Country of Origin: Switzerland

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Foerster MOC SBS Defectotest DS 19m Dectometer Testing Line including Foerster Defectotest DS Cirgograph Bright Bar Eddy Current, Tester, Rotating Sensor System DI, 7m Roller Table, 10m Bar Accumulation Table, Haul Off and Haul On Units, AMH Digital Control Console and Foerster R0130 DS Controller (2013). Country of Origin: Germany

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cutting Technology Systems STA 80 PLC Control Tube Cut-to-Length Line (2000). Country of Origin: Italy

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Heavy Duty Bundle Bar Bumping Press

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Larmuth Rotary Bar Wrapping Machine. S/No. S 7680 M-S TR. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Robertson 4 over 5, 2-Plane Flatner/Roller Straightener with Infeed/Outfeed Roller Conveyors, S/No. G4095. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

MOJ Barmatic 100V XL Tube Deburring & Bar Chamfering Machine with Horizon SM10-13R Portable Fume Extractor (2014). Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bar Chamfering Machine with Martonair M/3612 Sequence Controller

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Ripo 2 Off-Line Polishing/Straightening Machine, S/No. 6042 (1962), Range 394-1

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bigwood 8-Roll Straightening Machine. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Missler Semi-Automatic Horizontal Bandsaw, S/No. D3010 (1987) with Infeed/Outfeed Roller Conveyor

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Daewoo 7 Ton Counterbalance Diesel Fork Lift Truck Model D7OS-2 Type D, Mast Height 3700mm. S/No. EH-00087 (2003) Country of Origin: Korea

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Renner Compressor Type RS-T90, 90KW, 7.5bar, 14,500 Litres. S/No. 12674 (2006) with Air Receiver. Country of Origin: Germany

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Kaeser DSB 170 Compressor 30kw, 7.5 Bar. S/No. 172046 (1989). Country of Origin: Germany

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.