2605 - High Quality CNC Machining Centres & Lathes plus other Toolroom Equipment previously used by Jordan Engineering Ltd, Phase 2
Descrizione asta
Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Nikken 4th Axis Unit with 400mm 3-Jaw Chuck, Mazak E – Tower 5-Axis Multitasking Turning/Milling Machine with Matrix Control, Giewont Vertical FYA41M Milling Machine, Mitutoyo FN905 Co-ordinated Measuring Machine, DEA Co-ordinated Measuring Machine, Plus Many Others...
Date ispezioni
Viewing will be available by appointment only with the
Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email
us at:
info@cottandco.com
L'asta si chiuderà il:
martedì 22 ago 2017 at 03:00 PM BST
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato a 16.00%.
IVA
IVA applicata pari al20.00%.
Termine ultimo pagamento
giovedì 24 ago 2017 at 05:00 PM BST
Termine ultimo ritiro
giovedì 7 set 2017 at 05:00 PM BST
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Location: These Items are located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at a cost of the purchaser.
Lot 2 & 2A Combination, 100 & 101 have the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm. Please see individual lot for information.
Devi essere loggato per poterti registrare alle vendit
L'asta si chiuderà il:
martedì 22 ago 2017 at 03:00 PM BST
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato a 16.00%.
IVA
IVA applicata pari al20.00%.
Termine ultimo pagamento
giovedì 24 ago 2017 at 05:00 PM BST
Termine ultimo ritiro
giovedì 7 set 2017 at 05:00 PM BST
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Lots 1-10 / 87
Lot 1B: Fixture
Fixture
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 2: Doosan Mynx 7500/50 Vertical Machine Centre
Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = ,1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor. S/No. M75000041 (04/2010) (Excluding Vice & 4th Axis Unit)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Lot 2A: Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Lot *: Combination of Lots 2 & 2A
Combination of lots 2 & 2A
Lot 2 - Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = 1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Nikken 4th Axis Unit with 400mm 3-Jaw Chuck, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor. S/No. M75000041 (04/2010)
and
Lot 2A - Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
This lot has the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm.
2 Lotti compresi in questa combinazione
Lot 5: Mazak E – Tower 5 Axis Multitasking Turning / Milling Machine
Mazak E – Tower 5-Axis Multitasking Turning/Milling Machine with Matrix Control, Twin Vertical Chucks: 600mm diameter, X = 1,100mm, Y = 800mm, Z = 900mm, B-Axis: 150 Degrees, C-Axis: 360 Degrees, Speeds: 12,000rpm, 80-Position Toolchanger, Jet Coolant, (1) 600mm 4-Jaw Chuck & Chiller. S/No. 190766 (02/2007)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 10A: Steady Suitable for Doosan 400
Steady Suitable for Doosan 400
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 14: Giewont Vertical FYA41M Milling Machine
Giewont Vertical FYA41M Milling Machine, Table Size 2m x 400mm, 50 International Tooling. S/No. 11/57, (1985)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Lot 15: Pollard Multi Spindle Drill 31MX
Pollard Multi Spindle Drill 31MX, Table Size 33” x 29”. Ref/No.
30444A
Please Note: This Lot is in need of repair
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 20: Makita Bench Grinder
Makita Bench Grinder. S/No. 17016E
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchase
Lot 21: Clarke Woodworker 6" Horizontal Belt Linisher
Clarke Woodworker 6" Horizontal Belt Linisher
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.