2694 - A Large Range of Precision Plant Equipment available on the instruction of the new owners of Kilgour Aviation Ltd (In Administration) due to the closure of their Aviation Component Facility, Cleveleys, Lancashire
Descrizione asta
Mazak VTC 800/20SR 5 Axis Machining Centre, Mazak Variaxis 630-5X II 5 Axis Vertical Machining Centre, Mazak Nexus VMC 510C 3 Axis Vertical Machining Centre, Mazak Nexus VCN 410A-II 3 Axis Vertical Machining Centre, Mazak Nexus VMC 510C 3 Axis Vertical Machining Centre, Mazak Nexus QT250-II MSY 6 Axis Turning Centre, Mazak Nexus QTN 200 MSY 6 Axis Turning Centre, Deckel Maho DMU 70 Evolution 5 Axis Vertical Machining Centre, plus many others...
Date ispezioni
Viewing will be available by appointment only on 3rd & 4th September 2018. Possible subject to change. Please contact our Office on: +44 (0) 121 328 2424 and ask for Ari or email us at: info@cottandco.com ref Kilgour viewing.
Please Note upon viewings there will be no authorised operation of the machines.
L’asta si chiuderà il giorno:
mercoledì 5 set 2018 at 03:00 PM BST
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato al 16.00%.
IVA
IVA applicata pari al20.00%.
Termine ultimo pagamento
venerdì 7 set 2018 at 05:00 PM BST
Termine ultimo ritiro
giovedì 20 set 2018 at 05:00 PM BST
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Location: Majority of lots are located in Cleveleys. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lots 18 and 51 however are located in Birmingham. Please see individual lots for loading information.
The freehold property is also available for sale/lease and measures some 12000 sq.ft. The property has ample car parking and a large rear hard-standing area suitable for additional buildings or other external use. The whole site is freehold and is offered for sale with vacant possession and open to offers in excess of £400,000., or available leasehold on a 10 year lease with a 5 year revision and rent commencing at £48,000 per annum under full RICS terms. Please contact our office for further details: + 44 (0) 121 328 2424 or email: jenny.hobbins@cottandco.com
Devi essere loggato per poterti registrare alle vendit
L’asta si chiuderà il giorno:
mercoledì 5 set 2018 at 03:00 PM BST
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato al 16.00%.
IVA
IVA applicata pari al20.00%.
Termine ultimo pagamento
venerdì 7 set 2018 at 05:00 PM BST
Termine ultimo ritiro
giovedì 20 set 2018 at 05:00 PM BST
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Lots 31-40 / 88
Lot *: Combination of Lots 10 & 10A
Combination of Lots 10 & 10A
Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 10000rpm, Axis Travels X=1035mm Y=560mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1200 x 560mm, Swarf Conveyor, Coolant Filtration Unit, Through Spindle Coolant, 160mm Diameter 4th Axis, S/No. 15425023754 (2007)
and
Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V, Rack Included
Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
2 Lotti compresi in questa combinazione
Lot 11: Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre
Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre with Heidenhain I-TNC 530 Control System, 4th Axis, Tailstock, 6'' Chuck, Maximum Spindle Speed 10000rpm, Axis Travels X=1035mm Y=560mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1200 x 560mm, Swarf bin, Swarf Conveyor, Coolant Filtration Unit, Through Spindle Coolant. S/No. 15425023784 (2007)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Lot 11A: Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V
Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Lot *: Combination of Lots 11 & 11A
Combination of Lots 11 & 11A
Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 10000rpm, Axis Travels X=1035mm Y=560mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1200 x 560mm, Swarf Conveyor, Coolant Filtration Unit, Through Spindle Coolant. S/No. 15425023784 (2007)
and
Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V, Rack Included
Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
2 Lotti compresi in questa combinazione
Lot 12: Leadwell MH400 4 Axis Twin Pallet Horizontal Machining Centre
Leadwell MH400 4 Axis Twin Pallet Horizontal Machining Centre with Fanuc 18-m Control System, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=575mm Y=525mm Z=525mm B=360 Degrees (0.001), 40 Station ATC, Twin Tables, Pallet Dimensions 400mm x 400mm. S/No L1SIH0839 (1999)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Lot 12A: Rack of BT 40 Tooling for Leadwell MH400
Rack of BT 40 Tooling for Leadwell MH400, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Lot *: Combination of Lots 12 & 12A
Combination of Lots 12 & 12A
Leadwell MH400 4 Axis Twin Pallet Horizontal Machining Centre with Fanuc 18m Control System, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=575mm Y=525mm Z=525mm B=360 Degrees (0.001), 40 Station ATC, Pallet Dimensions 400 x 400mm, S/No L1SIH0839 (1999)
and
Rack of BT 40 Tooling for Leadwell MH400, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
2 Lotti compresi in questa combinazione
Lot 14: Leadwell V40 3 Axis Vertical Machining Centre
Leadwell V40 3 Axis Vertical Machining Centre with Mitsubishi CNC Control System, Maximum Spindle Speed 8000rpm, Axis Travels X=1020mm Y=510mm Z=510mm, Spindle Taper BT40, 20 Station ATC, Table Dimensions 500 x 1200mm, S/No. L1S1H0168 (1997)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Lot 14A: Rack of BT 40 Tooling for Leadwell V40
Rack of BT 40 Tooling for Leadwell V40, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Lot *: Combination of Lots 14 & 14A
Combination of Lots 14 & 14A
Leadwell V40 3 Axis Vertical Machining Centre with Mitsubishi CNC Control System, Maximum Spindle Speed 8000rpm, Axis Travels X=1020mm Y=510mm Z=510mm, Spindle Taper BT40, 20 Station ATC, Table Dimensions 500 x 1200mm, S/No. L1S1H0168 (1997)
and
Rack of BT 40 Tooling for Leadwell V40, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
2 Lotti compresi in questa combinazione
* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.