Butler Hi-Power Elgamill Bed Milling Machine with Heidenhain TNC 320 Control, Bed Size 6m x 1.8m Approx, Travel X= 5400mm, Y=2400mm, Z Width = 1000mm Approx. S/No. 74M874. Country of Origin: United Kingdom

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Machine Bed Angle Plates and Slotted, 3050m x 915mm suitable for Butler Elgamill

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

ISO 50 Taper Spindle Tooling

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Combination of lots 5, 5A & 5B

Lot 5 - Butler Hi-Power Elgamill Bed Milling Machine with Heidenhain TNC 320 Control, Bed Size 6m x 1.8m Approx, Travel X= 5400mm, Y=2400mm, Z Width = 1000mm Approx. S/No. 74M874. Country of Origin: United Kingdom

Lot 5A - Machine Bed Angle Plates and Slotted, 3050m x 915mm suitable for Butler Elgamill

Lot 5B - ISO 50 Taper Spindle Tooling

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Kuraki KBT-11-WA Table Type CNC Horizontal Boring and Milling Machine. S/No. 4257 (2000) with Fanuc 16i-M Colour CNC Control, Table Size 1400mm x 1600mm, X Travel 2000mm, Y Travel 1500mm, Z Travel 1450mm, Z Travel (quill) 500mm, Full B Axis Rotary Table, 40 Station ATC, BT-50, Max Table load 6500kg, Machine weight 27 tons. Country of Origin: Japan

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Webster and Bennett 72” T Series CNC Elevating Rail Vertical Turning and Boring Machine (1986) with Fagor 8040-T Colour CNC Control. S/No. 7345-2, Table Size 72”. Swing 84”, Max Height Under Cross rail 72”, Minimum Height under cross rail 24”, Table speeds 7.5 to 200rpm (2 Speed Gear Box), 40hp Main Motor, Power clamping to Elevating Rail, Manual R Type 5 position Turret. Country of Origin: United Kingdom

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Webster & Bennett 72” E-M series Vertical Turning and Boring Machine. S/No. 5969-4 (1969) Table speeds 5.2 to 117rpm, Feed 0.008” to 0.375” per rev, Table size 72” Max Turning Dia 84”, Max Height under elevating rail 72” (Tall Body machine), Turret Slide travel 50”, Hydraulic Clamping to Elevating Rail, 40 hp Main Motor. Country of Origin: United Kingdom

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Daewoo Puma 250MB Slant Bed CNC Lathe with C Axis and Live Tooling, Fanuc 18T CNC Control, Swing Over Bed 570mm, Swing Over Saddle 370mm, Max Turning Length 650mm, 250mm Diameter 3 Jaw Hydraulic, Chuck, Fully Prog Tailstock, 12 Station VDI Turret (6 Live), 77mm Bar Cap, Spindle Speeds 35-3500rpm, 15kw Main Motor, Swarf Conveyor, Machine Weight 5 Tons. S/No. P25M 0148. Country of Origin: Korea

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Lathe Tooling for Daewoo Puma 250m

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Various Tipped Turning Tools

Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis